plast & printpack alger 2025German Exhibitors IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG

IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG

About us

For over 50 years, IPT has been a leader in the development and manufacture of test equipment for the plastics industry worldwide.

The high international requirements for quality assurance in the plastics industry require equipment that enables reproducibility and accuracy that can be documented.

The IPT concept is based on versatile and continuously improving high-tech solutions for the current needs of the plastics industry and end users. This enables the production of products with outstanding design characteristics and perfect quality.

Renowned international testing institutes and manufacturers in the polymer industry have been relying on IPT technology and equipment for many years!

Notching Device motorised

Ring Stiffness Tester

RCP Tester

ESCR Tester

MFR/ MVR Tester

Falling Weight Tester

Temperature Cycling Test Unit

Airless Compact Line

Temperature Cycling Test Unit

Address

IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG
Schulstraße 3
86447 Todtenweis
Germany

E-mail: amadou.ba@iptnet.org
Phone: +49 8237 966480
Internet: www.iptnet.org

Contact person:

Amadou Ba
General Manager
E-mail: amadou.ba@iptnet.org

Products & Services

PLASTICS AND RUBBER INDUSTRY

_{Tests on Finished Products:}

· _{MFR/MVR TESTER Modell-No. 1709}

· _{TENSILE CREEP TESTER Modell-No. 1598}

· _{FNCT TENSILE CREEP TESTER Modell-No. 1719}

· _{ESCR TESTER Modell-No. 1692}

· _{RCP-S4-TESTER Modell-No. 1629, 1671}

· _{CONE TESTER Modell-No. 1680}

· _{CHEMICAL TEST STAND Modell-No. 1599}

· _{POWDER FLOW SPEED TESTER Modell-No. 1326}

· _{BULK DENSITY TESTER Modell-No. 1132}

· _{MICROSCOPE AND DIGITAL CAMERA Modell-No. H3022}

· _{ROTATIONAL MICROTOME Modell-No. H3009}

· _{CARBON BLACK TESTER Modell-No. 1398}

· _{DSC MEASURING DEVICE FOR OIT MEASUREMENTS Modell-No. H3003}

· _{K-VALUE TEST INSTRUMENT Modell-No. H3008}

· _{LABORATORY SIEVING MACHINE Modell-No. H3001}

· _{VOLATILE CONTENT TESTER Modell-No. H3004}

· _{MOISTURE CONTENT UNIT Modell-No. H3021}

· _{SHORE HARDNESS TESTER Modell-No. H3020}

_{Tests on Finished Products:}

· _{AIRLESS PROFESSIONALLINE Model no. 1720}

· _{AIRLESS BLUELINE Model no. 1774}

· _{AIRLESS LIGHTLINE Model no. 1790}

· _{AIRLESS BASICLINE AND AIRLESS BASICLINE BURST Model no. 1785}

· _{AIRLESS COMPACT LINE Model no. 1799}

· _{BURST TESTER FOR LARGE PIPES Model no. 1718}

· _{TEST TANKS FOR PIPE TESTING Model no. 1751-1760}

· _{CHILLER Model no. 1765}

· _{TEST OVEN Model no. 1662, 1674, 1776}

· _{BURST CHAMBER FOR FITTINGS Model no. 1618, 1623, 1639}

· _{TEST CHAMBER FOR LEAK TEST Model no. 1730}

· _{QUIX END CLOSURES 100 / 200 BAR Model no. 1732, 1733, 1735, 1736}

· _{END CLOSURES FOR BIG PIPES Model no. 1784}

· _{END CLOSURES WITH TIE ROD Model no. 1685}

· _{END CLOSURES FOR BURST TESTS ON FITTINGS Model no. 1617}

· _{END CLOSURES FOR COMPOSITE PIPES Model no. 1604}

· _{PULSATOR Model no. 1796, 1797}

· _{TEMPERATURE CYCLING TEST UNIT Model no. 1769, 1770}

· _{TEMPERATURE CYCLING TESTER ON WASTE WATER SYSTEMS (UNPRESSURISED) Model no. 1268}

· _{LOAD BOX Model no. 1772}

· _{RING STIFFNESS TESTER Model no. 1663, 1669}

· _{COMBITEST TEST STANDS Model no. 1771}

· _{METHYLENE CHLORIDE TESTER Model no. 1800}

· _{POINT LOAD TESTER Model no. 1775}

· _{COIL PRESSURE TEST DEVICE Model no. 1656}

· _{OXYGEN TESTER Model no. 1769}

· _{HEAT AGEING TEST DEVICE Model no. 1767}

· _{VACUUM TESTER Model no. 1715}

· _{UNIVERSAL TENSILE TESTER Model no. H3016}

· _{UNIT FOR DETERMINATION OF THE DEGREE OF CROSSLINKING Model no. H3006}

· _{VICAT/HDT TESTER Model no. H3013}

· _{CHLORINE TESTER Model no. 1802}

· _{FALLING WEIGHT TESTER Model no. 1713}

· _{IMPACT DROP TESTER Model no. 1654}

· _{PENDULUM IMPACT TESTER Model no. 3018}

_{Preparation of Test Samples:}

· _{CNC TEST BAR MILLING MACHINE Model no. 1812}

· _{NOTCH MILLING MACHINE Model no. 1653}

· _{MANUAL NOTCHING MACHINE Model no. H3047-0001}

· _{LABORATORY GRANULATOR Model no. 1665}

· _{CIRCULAR CROSS-CUTTING SAW Model no. 1625}

· _{BAND SAW Model no. H3038}

· _{HANDSAW FOR PLASTIC PIPES Model no. H3064}

· _{MARKING GAUGE Model no. 1291}

· _{SPIRAL PIPE CUTTER Model no. 1411}

· _{MANUAL CUTTING PRESS Model no. H3031}

· _{ROTATIONAL MICROTOME Model no. H3009}

· _{FORCED AIR OVEN Model no. H3014}

· _{FREEZER CELL Model no. H3026}

· _{ANALYTICAL BALANCE Model no. H3000}

_{Measurement Devices:}

· _{WALL THICKNESS MEASURING UNIT Model no. 1049}

· _{CIRCOMETER Model no. H3017}

· _{OUTSIDE CALIPER / INSIDE CALIPER Model no. H3019}

· _{DIGITAL VERNIER CALIPER Model no. H3024}

· _{MICROMETER Model no. H3023}

_Software:

· _{IPT DATALOGGING®}

Airless Professionalline

Visit website

Airless Professional

Quix End Closures 100/ 200 bar

The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature. The samples are tested either for a speciﬁed period or until they fail. The test duration is subject to the tension generated by the internal pressure and the temperature.

Visit website

Test Tanks for Pipe Testing

The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes. The samples are subjected to a constant hydrostatic internal pressure at a constant ambient temperature either for a speciﬁed period or until they fail. The test duration is subject to the tension generated by the internal pressure and the temperature. The IPT test tanks are specially designed for testing thermoplastic pipes and ﬁttings. The high reliability, durability of the materials used and the constant temperatures in the test tank with respect to both volume and time provide particularly reliable test conditions. The efﬁcient use of energy with low servicing and maintenance costs guarantee efﬁcient long-term operation. There are a wide range of tank dimensions and connection options, enabling the tanks to be flexibly adapted to various operating conditions.

Visit website

Test Tanks for Pipe Testing

CNC Test Bar Milling Machine

The test bar milling machine enables bar-shaped plastic samples to be produced for tension, pressure, bending and flexural impact tests in accordance with a wide range of standards. The CNC milling machine is a table-top unit with electrically locking protective doors. Pre-conﬁgured machining programs for all common bar shapes and visualisation via Windows makes it very easy to operate the milling machine. Up to ﬁve test bars can be produced in one milling process. The allround enclosure ensures safety at the workstation during the milling process. A swarf extraction system and the optional ionisation unit ensure the workstation remains clean.

Visit website

CNC Test Bar Milling Machine

FNCT Tensile Creep Tester

The tensile creep tester for tests in fluids is used to determine environmental stress cracking in samples with full notch creep test (FNCT). The tester is operated via a touch display. This means that each station is monitored individually. Load is applied to the samples by placing the weights on manually. The tester was designed so that each station can easily be removed from the test tank. A special circulation system ensures that a constant temperature is present in the test tank and that each sample is supplied evenly and constantly. The level in the test tank is monitored and shown on the touch display. The operator receives a warning to top up the test tank when the minimum level is reached.

Visit website

FNCT Tensile Creep Tester

IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG

Products & Services

Airless Professionalline

Quix End Closures 100/ 200 bar

Test Tanks for Pipe Testing

CNC Test Bar Milling Machine

FNCT Tensile Creep Tester

My German Pavilion